mardi 3 février 2015

Help getting Hard-Bricked phone booted to usable state topic






Hi Folks

Thanks for the time at visiting this thread, and I'm offering 2 beers as a part of my appreciation, should someone be able to help me getting the phone to a state, where a system can be flashed.
I have a Samsung Galaxy S3 mini (GT-I8190), which is now in a hard-bricked state, where the only gasp of life, is the notorious drill from the vibrator, as the phone seems to try and start-up, every 2 seconds. No Screen, light, or anything else.
The story behind is, that while having stock android, it started to spontaneously restart and go into a boot loop, until attached to a charger.
First every 7 days, then 3 days, then once a day, before it was several times a day.
I decided to root it, and install CM 11, and that wasn't without it's quirks, but flashed it became.
I noticed that the problem was still there, and there where some apps force closing all the repeatedly, so I went into TWRP that was flashed together with CM 11, and wiped data, and did a complete system factory setting.
I pushed the reboot to system button, and the next thing I remember, is that it vibrates, and nothing more, which is what it does every 2 second. When I leave it discharged for a while, and try to turn it on the first time, then it sounds like it "tries" the best, as there are 4 seconds between the vibrations, and then it goes as usual....

I suspect that I have manage to damage the boot loader somehow, and it can't either go in download mode, nor system "aka" Hard Bricked.
I have been looking around at the site, and have seen guides for other phones, where the boot loader is put on an micro SD card, and then revived that way.
Any help/method to get this phone into a usable state is widely appreciated, and once again, thanks for taking your time to read this!






Aucun commentaire:

Enregistrer un commentaire