**Make certain that your reactivation lock in security settings is off before beginning this process**
1. Take the OA1 OTA update.
2. Download and install Towelroot-v3.apk(this version does not require internet access).
3. Place your phone into "Download Mode" (press and hold the Home, Volume Down, and Power keys until the phone powers on and displays warning screen, then press Volume Up key) and flash the G870A_NE4_Stock_Kernel using Odin's PDA slot(AP in Odin v3.09+).
4. Open the Towelroot app from your app drawer and press "Make it Rain" to root your device.
5. Power off then boot into "Download Mode" again and flash the G870A_OA1_Stock_Kernel also using Odin's PDA slot(AP in Odin v3.09+).
6. Install SuperSU to manage root access. Done!
Notes:
1. After flashing the NE4 kernel your phone will run a little wonky and towelroot may not root on the first try. If that happens reboot and try towelroot once again. Once rooted and after flashing the OA1 kernel your phone will once again run like a champ!
2. Following the above process will not affect your User Data or Knox Warranty Flag.
3. When flashing the kernel the most common cause of an Odin flash failure is a bad usb port or cable. Please check before reporting a failure!
Alternative Method for Safestrap Users:
1. Place the G870A_OA1_100%_Stock_Rooted_ROM.zip(uploading.....) onto your ext-sdcard.
2. Use Safestrap's Backup Function to back-up User Data.
3. From the Safestrap recovery perform an "Advanced Wipe" and wipe everything but your ext-sdcard.
4. Flash the G870A_OA1_100%_Stock_Rooted_ROM.zip using Safestrap's "Stock Slot."
5. Then press "Home" then "Restore" and restore User Data.
6. Once complete press "Home" then "Reboot" and reboot into "Download" mode.
7. Last, flash the G870A_OA1_Stock_Kernel using Odin's PDA slot(AP in Odin v3.09+).
Notes:
1. The above process will update your Modem, Non-hlos, System, Kernel, Stock Recovery, and Bootloader to OA1.
1. Take the OA1 OTA update.
2. Download and install Towelroot-v3.apk(this version does not require internet access).
3. Place your phone into "Download Mode" (press and hold the Home, Volume Down, and Power keys until the phone powers on and displays warning screen, then press Volume Up key) and flash the G870A_NE4_Stock_Kernel using Odin's PDA slot(AP in Odin v3.09+).
4. Open the Towelroot app from your app drawer and press "Make it Rain" to root your device.
5. Power off then boot into "Download Mode" again and flash the G870A_OA1_Stock_Kernel also using Odin's PDA slot(AP in Odin v3.09+).
6. Install SuperSU to manage root access. Done!
Notes:
1. After flashing the NE4 kernel your phone will run a little wonky and towelroot may not root on the first try. If that happens reboot and try towelroot once again. Once rooted and after flashing the OA1 kernel your phone will once again run like a champ!
2. Following the above process will not affect your User Data or Knox Warranty Flag.
3. When flashing the kernel the most common cause of an Odin flash failure is a bad usb port or cable. Please check before reporting a failure!
Alternative Method for Safestrap Users:
1. Place the G870A_OA1_100%_Stock_Rooted_ROM.zip(uploading.....) onto your ext-sdcard.
2. Use Safestrap's Backup Function to back-up User Data.
3. From the Safestrap recovery perform an "Advanced Wipe" and wipe everything but your ext-sdcard.
4. Flash the G870A_OA1_100%_Stock_Rooted_ROM.zip using Safestrap's "Stock Slot."
5. Then press "Home" then "Restore" and restore User Data.
6. Once complete press "Home" then "Reboot" and reboot into "Download" mode.
7. Last, flash the G870A_OA1_Stock_Kernel using Odin's PDA slot(AP in Odin v3.09+).
Notes:
1. The above process will update your Modem, Non-hlos, System, Kernel, Stock Recovery, and Bootloader to OA1.
Aucun commentaire:
Enregistrer un commentaire