I have a SGH-M919 Galaxy S4 that works fine except for the touch screen (digitizer). There are no cracks on the screen and the display is fine. I see that there are a lot of guides for replacing the LCD/digitizer combo, but none that show only replacing the digitizer. Is that possible? I assume the combo consists of a front glass, the digitizer, and then the LCD. Can these be separated?
I swapped the motherboard from this S4 with the motherboard on a working S4 and the touch screen remained inoperative, so I know it is just the digitizer. Is it possible it is just the flax cable that connects to the motherboard? If so, can it be replaced by itself.
There are a lot of vendors on eBay selling LCD/digitizer combos for 0 - 0, but I hate spending that much when the screen is working fine. Any suggestions from the forum would be greatly appreciated.
Craig
I swapped the motherboard from this S4 with the motherboard on a working S4 and the touch screen remained inoperative, so I know it is just the digitizer. Is it possible it is just the flax cable that connects to the motherboard? If so, can it be replaced by itself.
There are a lot of vendors on eBay selling LCD/digitizer combos for 0 - 0, but I hate spending that much when the screen is working fine. Any suggestions from the forum would be greatly appreciated.
Craig
Aucun commentaire:
Enregistrer un commentaire