[Q&A] installed wrong ROM on Nokia XL topic

Hello
I'm in deep need for help...
I've been trying to get Google Play on my RM-1030 059V6Q2 (PL) 1.2.3.1 Nokia XL phone. Because my version was too high I tried flashing with an older rom... version 1.1.0.6... I can't remember the code of the 1.1.0.6, but I think it was 059V6Q2. no success in doing anything. So then I flashed with "RM-1030 NDT IMEA QA (059V6S3) (version 1.1.2.2)". Thing is that now I get a lot of errors that launcher and a ton of other apps stopped working. It's nearly unusable. This happens mostly when I reboot the phone. I tried putting 1.1.1.0 for 059V6Q2 and also managed to root and get google play. But I don't understand why this errors still coming up after flashing with the right ROM??? Plus that the update option says there are no new updates, but when I previously had this ROM, the update was available. I don't know what to do, please help... It's so time consuming to work with this phone and also find anything useful on the internet.

Bottom line after I put a room that doesn't belong to my phone I started getting errors and they didn't get fixed after I changed back to my initial rom.

[Q] Flashed wrong bootloader topic

So my friend asked me to try to fix his phone (no really, it's not mine).

He had an old i605 that he wanted to use on Tmobile. He had it rooted with with a custom rom (Jedi X) installed but was having difficulty getting LTE or HSPA. He decided to flash the MK7 modem for the t889, which has resulted in a soft brick.

So, this is where I'm at. I have been trying to flash the stock firmware over ODIN but I keep getting a write error. I can only boot into download mode, can not get into CWM which was installed previously. I can not boot into the Rom either.

Here is the log from ODIN:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_VZW_stock_system.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> system.img
<ID:0/008> NAND Write Start!!
<ID:0/008> Transmission Complete..
<ID:0/008> Now Writing.. Please wait about 2 minutes
<ID:0/008>
<ID:0/008> Receive Response form LOKE
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1

The top left of download mode i have:
ODIN MODE
Product name: SGH-T889 (this phone is actually the i605, I swear)
Custom Binary Download: Yes (1 counts)
Current Binary: Samsung Official
System Status: Custom
KNOX Warranty VOID: 0
RP SWREV: A2

I've tried pretty much everything that I can think of. I read in another thread to try to flash the same file over and over without clearing or closing ODIN, but that didn't work. I've been reading all day, attempting to find different stock packages to flash, all with no success. I've tried to flash a new PIT file; you name it, I've tried it. I'm concerned that it will need a JTAG fix. I'm hoping that I'm missing something simple ... or complex, I don't care at this point. Hopefully we don't have to send it for a JTAG, but if we do, then we will.

If anyone has any suggestions, please send them my way.

is there somthing wrong with my HTC or its normal? topic

I got my new HTC m8 couple of days and I noticed that the display on the right corner where it's to meet the device body is a slightly higher than the rest of the corners and it also look different than them is that like something to worry about ?

Wrong DAY showing on watch face? topic

So funny thing, my watch knows what the DATE (numerical number) it is, but it is 1 DAY fast. Meaning, it knows today is 2/2, but it thinks today is Tuesday, not Monday.... any ideas on how to fix this?

[Q] Fire TV Stick switches to wrong HDMI on its own topic

When I first got the stick I connected it to HDMI-1 on my Panasonic Plasma to do some testing, I later permanently moved it to one of the HDMI ports on my Pioneer receiver. The receiver connects to the TV via HDMI-2 where ARC is. The problem is that when I switch the receiver to the Fire TV input the TV automatically gets switched to HDMI-1 where nothing is connected, this also happens when FireTV gets out of sleep mode. I have to switch the TV back to HDMI-2. I am assuming that the FireTV is doing this via CEC. I have a Chromecast, Roku, SageTV and a PC connected to the receiver and none of them exhibit this behavior.

I rebooted multiple times but id does not help. I can disable CEC on the TV or Receiver but then I loose ARC so that is not an option. Any ideas on how to fix this?

LG l9 p760 with wrong rom topic

hello,
i have tried to flash my phone with new rom. Downloaded plenty of p760 roms, and all didint work, phone said that install aborted and this device is p960(prada) so i installed prada rom on it. It loads and going load, but stil wrong rom and dont work. Now i want to install correct rom, but its impossible. i have tried everything.
Bootloader is unlocked.
the biggest problem is that pc dont find my phone and driver is wrong, i have installed all latest drivers and done everything but still nothing. i hope someone help me here, because imout of ideas.

D802 Bricked After Flashing Wrong Rom topic

Hi, I accidentally flashed CloudyG2 3.0 rom to my D802, and now my device is bricked
at first it stuck at fastboot with no download mode, and then I fixed it by flashing boot.img and aboot.img using fastboot
but now I'm stuck at LG's logo

I can finally access download mode, but I can't flash my KDZ file, it always stopped at 49%
at the download mode, it displayed that my device is F320S and not d802, please help guys, thanks alot

Installing ROM with wrong clockwork mod version topic

Greetings, i am new here and i am posting this just in case someone gets problem like this and doesn't know how to fix.

If you accidentally tried to install ROM for ZTE Blade III with older Clockwork mod recovery version (i.e. tried to install KitKat 4.4 CM 11 with 6.0.2.7 instead with 6.0.4.9)

Just find older CM version in this case CM 10.1 and install it, it should get you JB 4.1.2 version working and then you can install newer CW version or install back stock ROM.

Hope this helps someone.

Cheers.

[Q] Flashed the wrong radio, need help topic

Hello There,

I have AT&T m7 and recently just S-OFF

I upgraded from 4.4.2 to the 7.15.401.1 firmware in order to flash the GPE 5.1 rom

But now it looks like I flashed the wrong radio or baseband because my cellular data is no longer working (althought I can still make calls)

Here is the output before I began:

Code:

---

daka@daRk-PC ~ $ sudo fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.502.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT34FW910399
(bootloader) imei: 354439053123222
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3875mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s

---

ANd here is the output afterwards:

Code:

---

daka@daRk-PC ~ $ sudo fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.60.0000
(bootloader) version-baseband: 4T.33.3218.15
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.15.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT34FW910399
(bootloader) imei: 354439053123222
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3833mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-91bb20e1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s

---

Please help me, I dont know what I did wrong.